Wood working I've been told that my first marquetry will be shit. I said "OK."

---

• I've been told that my first marquetry will be shit. I said "OK."
• Made this for my sophomore woodworking class
• Been lurking for a while and with the few tools I had and the help of a YouTube video I did my first build. Nothing compared to lots of you guys but I’m beyond proud! ☺️☺️
• Teahouse roof Reno I did this fall ➡️ some before pics at the end
• First time doing one of these. Walk-in pantry unit inside the kitchen all wrapped up.
• are chopping boards here are too fancyPants? heres mine.
• A pretty neat example of chatoyancy in a piece of maple.
• My first build ever. Figured a proper workbench was a good place to start. I know it’s the woodworking equivalent of paint-by-numbers, but I’m proud of it.
• Wenge and Zebrawood sliding and stacking boxes
• Wireless phone charger. Need to improve my routing skills on the back.
• On this unique project I have combined Asanoha pattern with custom made motifs to create this elegant Shoji lamp. The lamp consists of 294 pieces of thin walnut, bamboo and cedar strips and only reclaimed wood utilized with no paint to preserve the natural look. 30cm*14cm*14cm
• First post. Just finished this Shop stool made of hickory. All M&T construction - walnut wedged tenons holding the seat. You can see the MANY imperfections if you zoom in but... it’s shop furniture. Built to be sturdy not to be pretty.
• Made cutting boards as Christmas gifts for family and friends this year. Just couldn’t let this one go. Zebra wood and Peruvian walnut with a curly maple accent.
• A few pics of my first pipe of 2021, a new JD Allred design I'm calling an Acorn. This pipe is made with Strawberry briar and has a sandblasted body with a smooth bowl cap and shank face. The shank face also has a "Goblin" acrylic inlay with matching acrylic stem band and chamber port.
• Tea house framing pics / tight mitres
• Made this little house under the stairs for my son
• This is the first project I fully designed and built; finished end of 2020. I wanted to make a queen bed with storage that I could move in a small car. Breaks into 4 drawer boxes and one long storage box along the top. Maple ply and mixed hardwood veneers.
• Diagonal Cutting Board: my first one of these. Mahogany, Oak and Ash all from reclaimed wood
• I enjoy finding unique ways to work with defects in the wood. So I turned a bowl and put it where a knot was, and then carved out a rotten spot turning it into a feature. Coffee table made with reclaimed white ash, with a turned mahogany bowl
• DnD side cart
• It’s the small things about woodworking that make me love it. Spent more time on this under bevel corner than on the entire panel. Satisfaction comes in small sizes.
• Walnut, Cherry, Purple Heart and Hard Maple End Grain Cutting Board I did for a very happy customer. Used Odie’s Super Penetrating Oil, the the Original Oil, and finished with the Odie’s Wood Wax.
• Some furniture my dad made from 70 year old Douglas Fir barn wood!
• Finally got around to building a flipcart...

I've been told that my first marquetry will be shit. I said "OK." Posted: 08 Jan 2021 11:33 AM PST submitted by /u/poltroc [link] [comments]

Made this for my sophomore woodworking class Posted: 08 Jan 2021 07:14 AM PST submitted by /u/ecday [link] [comments]

Been lurking for a while and with the few tools I had and the help of a YouTube video I did my first build. Nothing compared to lots of you guys but I’m beyond proud! ☺️☺️ Posted: 08 Jan 2021 10:49 AM PST submitted by /u/Tactical_Empathy [link] [comments]

Teahouse roof Reno I did this fall ➡️ some before pics at the end Posted: 07 Jan 2021 11:46 PM PST submitted by /u/jcupp70 [link] [comments]

First time doing one of these. Walk-in pantry unit inside the kitchen all wrapped up. Posted: 08 Jan 2021 09:46 AM PST submitted by /u/Evan0196 [link] [comments]

are chopping boards here are too fancyPants? heres mine. Posted: 08 Jan 2021 02:44 AM PST submitted by /u/KauzeAndEffect [link] [comments]

A pretty neat example of chatoyancy in a piece of maple. Posted: 08 Jan 2021 01:08 PM PST submitted by /u/nopefist [link] [comments]

My first build ever. Figured a proper workbench was a good place to start. I know it’s the woodworking equivalent of paint-by-numbers, but I’m proud of it. Posted: 08 Jan 2021 03:23 PM PST submitted by /u/TheWorldisBroken [link] [comments]

Wenge and Zebrawood sliding and stacking boxes Posted: 08 Jan 2021 05:05 PM PST submitted by /u/bretsan [link] [comments]

Wireless phone charger. Need to improve my routing skills on the back. Posted: 08 Jan 2021 07:59 PM PST submitted by /u/jimothy_halpert88 [link] [comments]

On this unique project I have combined Asanoha pattern with custom made motifs to create this elegant Shoji lamp. The lamp consists of 294 pieces of thin walnut, bamboo and cedar strips and only reclaimed wood utilized with no paint to preserve the natural look. 30cm*14cm*14cm Posted: 08 Jan 2021 12:28 PM PST submitted by /u/artbyKemal [link] [comments]

First post. Just finished this Shop stool made of hickory. All M&T construction - walnut wedged tenons holding the seat. You can see the MANY imperfections if you zoom in but... it’s shop furniture. Built to be sturdy not to be pretty. Posted: 08 Jan 2021 07:22 PM PST submitted by /u/AlwaysTheAsshole1234 [link] [comments]

Made cutting boards as Christmas gifts for family and friends this year. Just couldn’t let this one go. Zebra wood and Peruvian walnut with a curly maple accent. Posted: 08 Jan 2021 04:57 AM PST submitted by /u/cdieter21 [link] [comments]

A few pics of my first pipe of 2021, a new JD Allred design I'm calling an Acorn. This pipe is made with Strawberry briar and has a sandblasted body with a smooth bowl cap and shank face. The shank face also has a "Goblin" acrylic inlay with matching acrylic stem band and chamber port. Posted: 08 Jan 2021 05:58 AM PST submitted by /u/jdallredpipes [link] [comments]

Tea house framing pics / tight mitres Posted: 08 Jan 2021 06:41 PM PST submitted by /u/jcupp70 [link] [comments]

Made this little house under the stairs for my son Posted: 08 Jan 2021 06:41 AM PST submitted by /u/standby_power [link] [comments]

This is the first project I fully designed and built; finished end of 2020. I wanted to make a queen bed with storage that I could move in a small car. Breaks into 4 drawer boxes and one long storage box along the top. Maple ply and mixed hardwood veneers. Posted: 08 Jan 2021 07:48 AM PST submitted by /u/thelostcyclist [link] [comments]

Diagonal Cutting Board: my first one of these. Mahogany, Oak and Ash all from reclaimed wood Posted: 08 Jan 2021 07:32 PM PST submitted by /u/TDMcCormick [link] [comments]

I enjoy finding unique ways to work with defects in the wood. So I turned a bowl and put it where a knot was, and then carved out a rotten spot turning it into a feature. Coffee table made with reclaimed white ash, with a turned mahogany bowl Posted: 08 Jan 2021 03:06 PM PST submitted by /u/kidtaeu [link] [comments]

DnD side cart Posted: 08 Jan 2021 09:27 PM PST submitted by /u/brafullofsawdust [link] [comments]

It’s the small things about woodworking that make me love it. Spent more time on this under bevel corner than on the entire panel. Satisfaction comes in small sizes. Posted: 08 Jan 2021 01:13 PM PST submitted by /u/The-disgracist [link] [comments]

Walnut, Cherry, Purple Heart and Hard Maple End Grain Cutting Board I did for a very happy customer. Used Odie’s Super Penetrating Oil, the the Original Oil, and finished with the Odie’s Wood Wax. Posted: 08 Jan 2021 01:19 PM PST submitted by /u/Foreverfukked [link] [comments]

Some furniture my dad made from 70 year old Douglas Fir barn wood! Posted: 08 Jan 2021 06:31 PM PST submitted by /u/AverageChicken9 [link] [comments]

Finally got around to building a flipcart... Posted: 08 Jan 2021 06:27 PM PST submitted by /u/SkullClown88 [link] [comments]

You are subscribed to email updates from Woodworking: all things made from trees.. To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States