Wood working I built a screened in porch on the backside of my cabin.

---

• I built a screened in porch on the backside of my cabin.
• I don't do many out door showers as a cabinet maker, but when one of your good customers says cost is no issue, I try my best.
• Couldn't decide on a lamp base shape, so I put one in the other.
• Today I made a cedar bat with a leather handle. It could be better but I love it!
• Recently wrapped up this foyer for a Client. Thought I’d share! ����‍��
• My first mallet, not perfect but it’s mine.
• Outdoor shower built for a client made out of teak and copper
• I made a dock for my sander how to scrap wood. It’s great for little pieces of wood and keeps my Ridgid oscillating spindle sander from doing spear throws
• My Star trek fan art (absolutely handmade) �� Borg queen wood marquetry. I used wood veneers: chestnut, eucalyptus, walnut, maple, bird eye maple
• Black walnut side table finished in osmo.
• If you haven’t thought of turning golf tees, they’re very fun and surprisingly easy. (Hope Dad likes them!)
• End-grain cutting board I made
• Foundation for a boathouse me and my dad are building
• Just finished 2 of 6 vegetable crates for my mom. ½” x 3” cedar, held together with a lot of staples.
• Picked up some cedar for $2/bdft. Pretty good deal!
• My first Kumiko project. Had to learn/fine tune a few skillsets including ripping thin stock and sharpening chisels razor sharp to complete this. Very happy with the result.
• Mushroom pendant I made from purpleheart and epoxy resin
• WIP - my first Kumiko. Far from perfect but a good learning experience
• Two Purple Poplar boards completed tonight, one that holds together with magnets was a bucket list item for me
• Custom Bed I made 3 years ago.
• Made a chuckbox
• African Blackwood and resin shaving brush handle
• Finished my pool deck (frame is PT, deck top is cedar)
• Plywood Edge Sofa Table

I built a screened in porch on the backside of my cabin. Posted: 04 Aug 2021 04:08 PM PDT submitted by /u/morphinebysandman [link] [comments]

I don't do many out door showers as a cabinet maker, but when one of your good customers says cost is no issue, I try my best. Posted: 04 Aug 2021 06:30 AM PDT submitted by /u/headyorganics [link] [comments]

Couldn't decide on a lamp base shape, so I put one in the other. Posted: 04 Aug 2021 06:52 PM PDT submitted by /u/dimwitted_designs [link] [comments]

Today I made a cedar bat with a leather handle. It could be better but I love it! Posted: 04 Aug 2021 05:53 PM PDT submitted by /u/O_Punishment_O [link] [comments]

Recently wrapped up this foyer for a Client. Thought I’d share! ����‍�� Posted: 04 Aug 2021 05:59 PM PDT submitted by /u/MrHardwoods [link] [comments]

My first mallet, not perfect but it’s mine. Posted: 04 Aug 2021 05:24 PM PDT submitted by /u/BIGfishSTICKS84 [link] [comments]

Outdoor shower built for a client made out of teak and copper Posted: 04 Aug 2021 09:18 AM PDT submitted by /u/jjrogers139 [link] [comments]

I made a dock for my sander how to scrap wood. It’s great for little pieces of wood and keeps my Ridgid oscillating spindle sander from doing spear throws Posted: 04 Aug 2021 05:25 AM PDT submitted by /u/NewmanSpecialsWood [link] [comments]

My Star trek fan art (absolutely handmade) �� Borg queen wood marquetry. I used wood veneers: chestnut, eucalyptus, walnut, maple, bird eye maple Posted: 04 Aug 2021 01:00 PM PDT submitted by /u/Andulinomarquetry [link] [comments]

Black walnut side table finished in osmo. Posted: 04 Aug 2021 12:45 PM PDT submitted by /u/myridingmower [link] [comments]

If you haven’t thought of turning golf tees, they’re very fun and surprisingly easy. (Hope Dad likes them!) Posted: 04 Aug 2021 08:30 PM PDT submitted by /u/Dinosaur18750 [link] [comments]

End-grain cutting board I made Posted: 04 Aug 2021 11:29 AM PDT submitted by /u/Epskampie_real [link] [comments]

Foundation for a boathouse me and my dad are building Posted: 04 Aug 2021 07:17 PM PDT submitted by /u/maybe_hopeless [link] [comments]

Just finished 2 of 6 vegetable crates for my mom. ½” x 3” cedar, held together with a lot of staples. Posted: 04 Aug 2021 07:42 PM PDT submitted by /u/KingBearSole [link] [comments]

Picked up some cedar for $2/bdft. Pretty good deal! Posted: 04 Aug 2021 07:50 PM PDT submitted by /u/dugytech [link] [comments]

My first Kumiko project. Had to learn/fine tune a few skillsets including ripping thin stock and sharpening chisels razor sharp to complete this. Very happy with the result. Posted: 04 Aug 2021 06:48 AM PDT submitted by /u/HikingDad [link] [comments]

Mushroom pendant I made from purpleheart and epoxy resin Posted: 04 Aug 2021 01:38 PM PDT submitted by /u/Catharsius [link] [comments]

WIP - my first Kumiko. Far from perfect but a good learning experience Posted: 04 Aug 2021 09:22 AM PDT submitted by /u/mrmarkgyver [link] [comments]

Two Purple Poplar boards completed tonight, one that holds together with magnets was a bucket list item for me Posted: 04 Aug 2021 05:20 PM PDT submitted by /u/RubURMeat [link] [comments]

Custom Bed I made 3 years ago. Posted: 04 Aug 2021 04:53 PM PDT submitted by /u/ihavespokentoomuch [link] [comments]

Made a chuckbox Posted: 04 Aug 2021 06:24 PM PDT submitted by /u/cncwood [link] [comments]

African Blackwood and resin shaving brush handle Posted: 04 Aug 2021 02:59 PM PDT submitted by /u/VernestWatkins [link] [comments]

Finished my pool deck (frame is PT, deck top is cedar) Posted: 04 Aug 2021 12:24 PM PDT submitted by /u/95accord [link] [comments]

Plywood Edge Sofa Table Posted: 04 Aug 2021 01:50 PM PDT submitted by /u/Dakine_Lurker [link] [comments]

You are subscribed to email updates from Woodworking: all things made from trees.. To stop receiving these emails, you may unsubscribe now.	Email delivery powered by Google
Google, 1600 Amphitheatre Parkway, Mountain View, CA 94043, United States